30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
A pair of Lingotte alabaster bar sconces glowing on a wood-paneled bedroom wall above the bed

Lingotte · alabaster bar wall sconce

A bar of stone, lit end to end

Natural alabaster in a rounded metal frame. The whole face glows warm, and light spills from the edges onto the wall.

60 cm23.6 in long
2 waysVertical or horizontal
3000KWarm white
LEDBuilt in, included

Size & specs

23.6 in of stone, 2 in off the wall

The bar is 3.1 in / 8 cm wide, 2 in / 5 cm deep and 23.6 in / 60 cm long, and mounts vertically or horizontally. Tap a finish to see it on the drawing.

H 23.6 in / 60 cmW 3.1 in / 8 cmD 2 in / 5 cmFRONTSIDElight spillsfrom the edges
SizeW 3.1 in / 8 cm × D 2 in / 5 cm × H 23.6 in / 60 cmMounted horizontally, it is 23.6 in / 60 cm long
ShadeNatural alabaster panel
MaterialAlabaster, iron
FinishGold tone or black tone frame
Light sourceIntegrated LED, 3000K warm white, included
MountingVertical or horizontal
VoltageAC 110–240 V (works with standard US 120 V)
InstallationHardwired wall mount, controlled by a wall switchProfessional installation recommended
EnvironmentIndoor dry locations
The Lingotte alabaster bar wall sconce lit on a warm wall, in the gold tone frame
Gold tone, lit

The light

A glowing face and a soft halo

Lit, the whole stone face glows warm and the cloudy veining runs along its full length. Light also spills from the edges and washes the wall around it.

Close-up of the lit alabaster face with cloudy amber veining
The face · veining along its full length
  • THE WHOLE FACE GLOWS

    Lit end to end

    The whole alabaster face glows, not just a spot in the middle.

  • EDGES WASH THE WALL

    A halo on the wall

    Light spills from the edges and washes the wall with a soft glow.

  • 3000KWARM WHITE

    3000K warm white

    A warm, calm white that suits bedrooms, bathrooms and living rooms.

  • LED BUILT IN · NO BULBS

    No bulbs to buy

    The LED is built in and included, so it is ready once installed.

Two ways to mount

Upright beside, or level above

The same bar works vertically or horizontally. Pick a direction to see where it fits best.

A pair of Lingotte sconces mounted vertically on either side of a mirror above a wooden dressing table
MOUNTED VERTICALLYin a pair beside a mirroralso beside a bed or a fireplace
Vertical

Upright, alone or in pairs

Stood on end, the bar adds a tall line of warm light to the wall.

  • 01Beside a bed, as a reading-side glow
  • 02In a pair on either side of a mirror
  • 03Beside a fireplace
60 cm23.6 in tall8 cm3.1 in wide5 cm2 in off the wall
A Lingotte sconce in the black tone mounted horizontally above a bathroom mirror and vanity
PICTURE LIGHTABOVE A MIRROR
Horizontal

Level, as a vanity or picture light

Laid flat, the bar spreads light across a mirror or a piece of art.

  • 01Above a bathroom mirror, as a vanity light
  • 02Above artwork, as a picture light
  • 03Above a dressing table
60 cm23.6 in long8 cm3.1 in tall5 cm2 in off the wall

The photo shows the black tone frame.

In the room

Bedroom, dressing table and bath

A few places it sits well, mounted upright or level.

A Lingotte sconce mounted vertically against a wood-paneled wall beside a bed
Bedroom

Beside the bed

A tall glow against a wood-paneled wall.

A Lingotte sconce mounted vertically above a nightstand next to a bed and a framed print
Bedroom

Over the nightstand

Soft light by the bed, next to the art.

Two Lingotte sconces mounted vertically either side of a mirror over a dressing table
Dressing table

A pair at the mirror

Even light on both sides of the face.

A Lingotte sconce in the black tone mounted horizontally above a mirror
Bath · black tone

Above the mirror

Laid flat as a vanity light.

Questions

Good to know before you order

Size, mounting, installation and the stone: short answers to the most common questions about Lingotte.

How big is it?

It is 3.1 in (8 cm) wide, 2 in (5 cm) deep and 23.6 in (60 cm) long.

Can it be mounted horizontally?

Yes. It mounts vertically or horizontally. Level, it works as a vanity light above a mirror or a picture light above artwork. Upright, it can sit beside a bed, a mirror or a fireplace, alone or in pairs.

How is it installed?

It is a hardwired wall mount, controlled by a wall switch. We recommend professional installation. It runs on AC 110–240 V, which works with the standard US 120 V supply.

Do I need to buy bulbs?

No. It uses an integrated 3000K warm white LED, and it is included.

Which finishes are available?

The frame comes in a gold tone or a black tone. The stone panel is the same natural alabaster on both.

Will my stone look like the photos?

Each panel is cut from real stone, so the veining varies from piece to piece. Lit, the whole face glows warm and its cloudy veining comes through.

Natural alabaster

A stone that lets light through

Alabaster is a soft natural stone. Cut into a panel, it lets light pass through, and every piece carries its own veining.

  • Rough edge of a raw alabaster block with stone chips

    From raw stone

    Each panel starts as a block of natural alabaster.

  • Close-up texture of pale white alabaster with soft veining

    Soft, cloudy veins

    Pale stone with veining that shows when the light is on.

  • Stacked alabaster blocks, each with different veining

    No two the same

    Because it is real stone, the veining varies from piece to piece.

The craft

From quarry to panel

The general steps that take a block of alabaster to a finished stone panel.

  1. STEP 01Alabaster quarry with excavators lifting large blocks of white stone

    Quarried

    Large blocks of alabaster are lifted from the quarry.

  2. STEP 02Alabaster stone yard with raw slabs and cut blocks

    Sorted

    The raw stone is sorted and prepared in the yard.

  3. STEP 03Stacks of cut alabaster slabs in a workshop

    Cut into slabs

    Blocks are cut into slabs, ready to be shaped into panels.

  4. STEP 04Craftsman sanding an alabaster block smooth with a hand sander

    Sanded smooth

    Each piece is sanded by hand until the surface is smooth.

Customer reviews

Lit up in their homes.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Reviews in Other Languages

30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
30-day returns
Free shipping within the U.S.
The Samu Difference

Why Choose SamuLighting

Free U.S. Shipping

On every order, with no minimum.

30-Day Returns

Straightforward returns and refunds.

Secure Checkout

SSL-encrypted payment at every step.

Finished by Hand

Every fixture inspected before it ships.